cecotec CONGA 7490 ULTIMATE X-TREME Manual De Instrucciones página 58

ENGLISH
Note:
- If you wish to mop, do not fill the water tank.
- To ensure a perfect scrubbing from the start, it is suggested to dampen the mop evenly
with water before fixing it to the mixed tank. It is also recommended to wash the mop after
every use.
- It is recommended to be present when the robot vacuum cleaner is scrubbing.
- When the robot vacuum cleaner returns to the charging base, you must remove the mop.
Do not leave the robot vacuum cleaner charging with the mop assembled.
Manual mode
The robot vacuum cleaner can be moved manually by selecting manual mode in the application
and using the arrow keys.
Back Home mode
Press the Back Home button on the robot vacuum cleaner or select the option in the app to
send the robot vacuum cleaner to the charging base in any cleaning mode. The robot vacuum
cleaner will stop vacuuming until it reaches the base.
Smart Area mode
Once the house map has been saved, select this mode to clean a predefined area. Cleaning
will be carried out in Edge mode first, then in zigzag movements. The robot vacuum cleaner
will clean the selected area and then return directly to the charging base without vacuuming.
To activate this mode, select the Smart Area option on the app.
Room Mode
Once the map of the house has been saved, select this mode for the robot to clean specific
rooms. Cleaning will be carried out in Edge mode first, then in zigzag movements. Once done
cleaning the selected rooms, the robot vacuum cleaner will directly return to the charging base
without vacuuming.
You can create a cleaning plan tailored to each room and adjust the following parameters:
cleaning mode, suction power, and scrubbing level.
To activate this mode, select the Room cleaning option on the app.
Spot mode
Select this mode to clean a specific area of the map around the marked point. The robot
vacuum cleaner will clean a 2 x 2 m area in Edge mode first, and then in zigzag mode. Once
cleaning is complete, the robot vacuum cleaner will directly return to the charging base
without vacuuming.
To activate this mode, select the spot cleaning option on the app.
58