HOW TO SET UP YOUR UNiT
Location
of the Air Compressor
Locate the air compressor
in a
ciean, dry and well ventilated area.
The air compressor
should be
located at least 12" away from the
wall or other obstructions
that will
interfere with the flow of air. The
air compressor
pump and shroud
are designed to allow for proper
cooling. The ventilation openings
on the compressor
are necessary
to maintain proper operating
temperature.
Do not place rags or
other containers on or near these
openings. The air filter must be kept
clear of obstructions
which could
reduce air flow to the air compressor.
GROUNDING
iNSTRUCTiONS
RISK OF
ELECTRICAL
SHOCK.
in the event of a short
circuit,
grounding
reduces
the risk
of shock by providing
an escape
wire for the eJectric current.
This
air compressor
must be propermy
grounded.
The portable air compressor
is
equipped with a cord having a
grounding wire with an appropriate
grounding
ptug (see following
illustrations).
The plug must be used
with an outlet that has been installed
and grounded in accordance
with all
local codes and ordinances.
1.
The cord set and plug with this
unit contains a grounding
pin.
This phg MUST be used with a
grounded outlet.
IMPORTANT: The outlet being used
must be instaIIed and grounded in
accordance
with all local codes and
ordinances.
2.
Make sure the outlet being used
has the same configuration
as the grounded phg. DO
NOT USE AN ADAPTER, See
illustration.
_Grounded
___
pinl _
Outlets
3.
Inspect the plug and cord before
each use. Do not use if there are
signs of damage.
4.
If these grounding instructions
are not completely
understood,
or if in doubt as to whether
the compressor is properly
grounded, have the installation
checked by a qualified
electrician.
IMPROPER
GROUNDING
CAN
RESULT iN ELECTRICAL
SHOCK.
Do not modify
the pBug provided,
if
it does not fit the availabme outBet,
a correct
outlet shouM be installed
by a quamified eBectrician,
Repairs to the cord set or pmug
MUST be made by a quamified
emectrician.
11- ENG
A09708