Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
INSTALLATION
Before first use, remove the PVC film from the cooking plate and drip tray.
Set the plancha on a horizontal, non-flammable surface (e.g. tiles, firebrick, stainless
steel, etc.). Make sure there is a distance of at least 10 cm between the plancha and any
adjacent walls.
If this appliance must be placed in close proximity to a wall, partition, kitchen furniture,
decorative borders, etc.,they should be of non-flammable material. If not, they should
be covered by appropriate heat insulating, non-combustible material, with particular
attention paid to fire prevention regulations.
Assemble the drip tray handles as shown in the diagram below :
Place the filter in the drip tray to capture cooking run-off.
PROTECTIVE LID
Assemble the protective lid as shown in the diagram below :
Set the plancha in a sheltered location, away from wind and draughts.
The lid will protect your appliance from the elements. Ensure the lid is open before
using the plancha. Do not close the lid during cooking.
After the appliance has been switched off, wait for it to cool completely before cleaning
and closing the lid.
- 22 -
Publicidad
