cecotec bolero DRESSCODE 740 BI Inverter A Manual De Instrucciones página 91

Pre-Wash
Switch on the equipment
Select a programme
Press the button
before the main wash cycle starts, to increase the washing performance (Prewash icon will
light up ).
Note: detergent must be added to compartment I.
Spin speed
Switch on the equipment
Select a programme
Press this button
Temperature
Switch on the equipment
-
When necessary, the wash temperature can be adjusted by pressing the button
-
following the sequence below: Cold-20ºC-30ºC-40ºC-60ºC-90ºC.
My Cycle
With this option you can save the configuration of the most frequently used programme.
1. Switch on the equipment
2. Choose the desired programme using the selector and the desired settings if applicable
(temperature, spin speed, prewash, extra rinse).
3. Press and hold the Speed button for approx. 3 seconds.
The settings will be saved.
4. By selecting the "My Cycle" programme through the selector, the previously saved
settings are automatically activated.
Child Lock
Switch on the equipment
-
Press the Temp and Speed buttons at the same time for approximately 3 seconds.
-
Note:
-
When the child lock is activated and the washing programme starts, the indicator will
-
light up.
Press and hold both buttons again to unlock the function.
-
This function locks all buttons except the On/Off button and the child lock button itself.
-
Deactivate the child lock function before selecting a programme and starting washing.
-
and select Prewash to make the appliance perform an additional wash
to select the desired speed.
BOLERO DRESSCODE 740/840/940 BI INVERTER A
ENGLISH
and
91