cecotec bolero DRESSCODE 740 BI Inverter A Manual De Instrucciones página 98

ENGLISH
Assembly tools (not included)
1. Screwdriver
2. Electric screwdriver
3. Ruler
4. Pencil
General measures to build-in the washing machine (Fig. 21)
Door preparation and assembly (Fig. 22)
1. Door installation with opening direction from left to right.
2. Door assembly with opening direction from right to left.
Steps to follow:
Make a mark on the door using the positioning sheet (Fig. 23).
1.
Fix the positioning sheet on the door (Fig. 24).
2.
Drill holes in the door (Fig. 25).
3.
Install the hinges and spacers using the screws provided (Fig. 26).
4.
Install the magnets (Fig. 27).
5.
Attach the magnets to the washing machine.
c.
Screw the magnets to the washing machine.
d.
Install the door using the screws provided (Fig. 28).
6.
WARNING
When installing the appliance in the kitchen, make sure that, if possible, the hoses are placed
in either of the two recesses at the back of the appliance. This will help prevent the hoses
from kinking or getting trapped.
9. DISPOSAL OF OLD ELECTRICAL AND ELECTRONIC APPLIANCES
This symbol indicates that, according to the applicable regulations, the product
and/or battery must be disposed of separately from household waste. When
this product reaches the end of its shelf life, you should dispose of the cells/
batteries/accumulators and take them to a collection point designated by the
local authorities.
Consumers must contact their local authorities or retailer for information concerning the
correct disposal of old appliances and/or their batteries.
Compliance with the above guidelines will help protecting the environment.
98
BOLERO DRESSCODE 740/840/940 BI INVERTER A