Waeco ASC 6300 G Instrucciones De Uso página 20

EN
13.3.1 Creating user codes
1. In the basic menu use the cursor keys or to select Other selections.
Short selection
Free selection
Other selections
ENTER‐OK
2. Press ENTER
3. Use the cursor key to select Service and press
Flushing
Reset scales.
Service.
ENTER‐OK STOP‐EXIT
4. To acces the ADM administrator menu enter the password
Service.
5. Enter the administrator code
Insert ADM Code
Note For security reasons, a new administrator code must be selected each time, but not
will deactivate the entire function.
6. Enter the new administrator code:
ADM AREA
Insert new code
7. Confirm the new administrator code:
ADM AREA
Confirm new code
8. Use the cursor keys or to select the user.
ADM AREA
User number
9. Create the four­digit personal user code. Once a code is created here, the A/C service unit can then only be
operated using this code.
ADM AREA
User number
Insert new code
10. Confirm the new user code:
20
to confirm.
(default setting) and press
0000
ENTER
to confirm.
and press
9786
‐‐‐‐
ENTER to confirm:
‐‐‐‐
‐‐‐‐
‐‐‐‐
1
1
‐‐‐‐
ENTER
to confirm.
0000
as this