EdilKamin DEMY Instalación Uso Y Mantenimiento página 36

g. 4
D
g. 4
g. 5
g. 6
INSTALLATION
E
F
- Fasten the square pieces to the lower inner part of the glass
sides and front with the screws/knurled washers and studs
provided (D -Fig. 4).
- Re t the glass sides and front by tting them in the seats
located on the base of the stove (E - Fig. 5).
N.B. Verify that the front glass does not be in contact with
the locking handle during its opening phase.
- Fasten the glass sides and front in the upper part on the slots
(F - Fig. 6) on the under-top of the stove with the screws/knur-
led washers and studs provided.
In this step, you can adjust the alignment of the glass sides and
front.
- 36
-