Thermador Professional PCG30 Manual De Instalación página 6

Consider Make-Up Air:
Due to the high volume of ventilation air, a source of
outside replacement air is recommended. This is
particularly important for tightly sealed and insulated
homes.
A qualified heating and ventilating contractor should be
consulted.
NOTE:
Ventilation hoods and blowers are designed for use with
single-wall ducting. Some local building codes may require
double-wall ducting. Before starting installation, consult
local building codes and agencies to insure that the
installation will meet local requirements.
Cooktop Cooktop Minimum Recommended
Ventilation Options
Width Configuration Blower Capacity*
30" 4 burners 800 CFM
36"
48"
4 burners with griddle
6 burners
6 burners with griddle
1000 CFM
1100 CFM
1300 CFM
30" or 36" Pro Wall Hood
30" or 36" Custom Insert w/optional blower
42" Island Hood w/optional blower
36" or 42" Pro Wall Hood
36" Custom Insert w/optional blower
42" or 48" Island Hood w/optional blower
48 .... or 54" Pro Wall Hood
48" Custom Insert w/optional blower
54" Island Hood w/optional blower
Important Notes:
• It is recommended that a Thermador Professional wall or island hood or custom insert is used with Thermador
Professional Cooktops.
• Refer to www.Thermador.com for a complete selection of Professional Ventilation options, Blowers, and
Accessories.
• * For high output gas cooktops (60,000 BTU or greater), the minimum of one (1) CFM of ventilation per 100 BTU is
recommended. If the cooktop has a griddle, add 200 CFM to the estimated blower capacity. Additional blower
capacity may be required for longer duct runs.
• For island applications, it is recommended to use a hood width that exceeds the width of the cooktop by 6"
(overlapping the cooktop by 3" on each end).
• **Not all 48" Pro Wall Hood models can accommodate a 1300 CFM blower option.
• CFM = "cubic feet per minute" (standard blower capacity rating).
English 4