Taurus BAPI 1000 INOX Manual Del Usuario página 10

Accessories:
Stick blender accessory (Fig. 1):
- This accessory is used to make sauces, soups,
mayonnaise, milkshakes, baby food, crushed
ice, etc.
- Attach the stick blender to the motor body by
turning it in the direction indicated by the arrow
(Fig. 1.1).
- Pour the foodstuffs into the sieve and operate it
by pressing the start button.
- Detach the stick blender by turning it in the
opposite direction to the arrow and remove it for
later cleaning.
Chopping accessory (Fig. 2):
- This accessory is used to chop vegetables, nuts,
meat...
- Fit the adapter fitting to the motor unit by turning
it in the direction of the arrow. (Fig. 2.1)
- Fit the unit to the lid until hear the click. (Fig.
2.2)
- Put the food to be prepared in the chopping
container and attach the lid firmly. (Fig. 2.3)
- Start the appliance. Warning: do not start the
appliance if the entire unit is not properly seated
and fitted. (Fig. 2.4)
- Stop the appliance when the food reaches the
desired texture.
- Detach the unit from the lid and release the
adapter fitting. (Fig. 2.5)
Whisk accessory (Fig. 4):
- This accessory is used to whip cream, beat egg
whites...
- Insert the whisk into the adapter fitting (Fig. 4.1).
Fit the adapter fitting to the motor unit by turning
it in the direction of the arrow (Fig. 4.1).
- Put the food into a recipient and start the
appliance. For optimum results, move the whisk
clockwise (Fig. 4.2).
- Remove the whisk accessory and release the
adapter fitting (Fig. 4.3).
Note 1: Do not work at high speeds even with the
turbo function with this accessory attached, as
this would cause defects in the whisk (spinning
its wires).
- Note 2: To free the whisk from the adapter
fitting, pull the ring on the whisk.
Safety thermal protector:
- The appliance has a safety device, which pro-
tects the appliance from overheating.
- If the appliance turns itself off and does not
switch itself on again, disconnect it from the
mains supply, and wait for approximately 15
minutes before reconnecting. If the machine
does not start again seek authorised technical
assistance.
Cleaning
- Disconnect the appliance from the mains and let
it cool before undertaking any cleaning task.
- Clean the equipment using a damp cloth with a
few drops of washing-up liquid and then dry.
- Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products,
for cleaning the appliance.
- Do not submerge the appliance in water or any
other liquid, or place it under a running tap.
- During the cleaning process, take special care
with the blades, as they are very sharp.
- It is advisable to clean the appliance regularly
and remove any food remains.
- If the appliance is not in good condition of clean-
liness, its surface may degrade and inexorably
affect the duration of the appliance's useful life
and could become unsafe to use.
- The appliance is suitable for cleaning in hot
soapy water or in a dishwasher (using a soft
cleaning program):
- Whisk
- Liquidiser attachment.
- Goblet
- Measuring cup
- The draining/drying position for washable parts
in dishwashers or after washing by hand in a
sink must allow for water to drain easily (Fig 5).
- Next dry all the parts before fitting them together
and storing.