STORZ & BICKEL Venty Modo De Empleo página 49

7.1 Cooling Unit
Cooling Unit with Mouthpiece must be free of deposits. Deposits on the inside of the Cooling Unit are mainly
caused by steam condensate. Cleanliness is a prerequisite for proper function.
X Check the Cooling Unit with Mouthpiece prior to each use.
X Clean the Cooling Unit with Mouthpiece no later than 7 days after the last use and if deposits are visible on
the inside of the Cooling Unit.
7.1.1 D isassembling the Cooling Unit
X Pull the Mouthpiece out of the Cooling Unit Cap while slightly tilting it back and forth.
X Pull off the Mouthpiece Seal Ring using the recess.
7 C L E A N I N G / H Y G I E N E
X Put the edge of the Mouthpiece into the notch at the Rotary Cap and
turn it counterclockwise to open and pull out.
Pull off the Seal Ring from the Rotary Cap using the recess.
X Pull the Cooling Unit Cap off the Vaporizer
X Pull out the Screen inside the Cooling Unit.
X Use the Filling Chamber Tool to press the Setting Wheel out of the Cooling
Unit and let the Seal Ring fall out.
49