STORZ & BICKEL Venty Modo De Empleo página 51

7.1.2.1 C leaning the Cooling Unit and the Filling Chamber Screen with
rinsing water
X Place all parts in warm rinsing water for at least five minutes.
X Rinse all parts under running water for at least one minute.
X Let all parts dry completely.
7.1.2.2 A lternative: Cleaning the Cooling Unit and the Filling Chamber Screen with Isopropyl Alcohol
CAUTION
Isopropyl Alcohol is flammable and may easily ignite
Caution! Hot surface!
• Follow the safety instructions of the isopropyl alcohol manufacturer!
NOTICE
Material damage caused by improper cleaning
Embrittlement of plastic parts
• Soak plastic parts in isopropyl alcohol for maximum 1/2 hour.
7 C L E A N I N G / H Y G I E N E
X Place all parts of the Cooling Unit and the Filling Chamber
Screen in isopropyl alcohol for a maximum of 1/2 hour.
X Rinse all parts under running water for at least one minute.
X Let all parts dry completely.
51