STORZ & BICKEL Venty Modo De Empleo página 50

7.1.2 C leaning the Cooling Unit and the Filling Chamber Screen
X Use the Cleaning Brush and cotton swabs and paper or cotton cloths for manual cleaning.
X Use warm rinsing water or isopropyl alcohol as a solvent.
X Clean the Filling Chamber Screen and the Screen of the Cooling Unit with the Cleaning Brush after each
use.
7 C L E A N I N G / H Y G I E N E
X Unscrew the Cooling Unit Base from the Vaporizer by turning it 90°
counterclockwise.
X Carefully press out the Screen from above using a cotton swab.
X Lever out the large Base Seal Ring with the Filling Chamber Tool at the
recess in the groove.
50