STORZ & BICKEL Venty Modo De Empleo página 52

7.1.3 C heck the Cooling Unit Parts and the Filling Chamber Screen
X Check all parts for damaged surfaces, cracks, softening, hardening, embrittlement, contamination or dis-
coloration.
X Discard damaged parts.
7.1.4 A ssembling the Cooling Unit
CAUTION
Plant particles in the Cooling Unit
Clogging of the Cooling Unit
Inhalation of plant particles
• Insert the Screen correctly into the Cooling Unit Base.
X Assemble the parts in reverse order.
X Place the Seal Ring just on top of the Setting Wheel for Airflow and make sure that the "TOP" label is inserted
upwards.
X When assembling, make sure that Seal Rings are properly seated.
X Insert Screen in the groove provided for this purpose.
7.2 Filling Chamber
7.2.1 Cleaning the Filling Chamber
X Clean the Filling Chamber with a cotton swab soaked in isopropyl alcohol.
NOTICE
Material damage caused by improper cleaning
Ingress of isopropyl alcohol into the Vaporizer
• Do not moisten cotton swabs too much.
7 C L E A N I N G / H Y G I E N E
52