STORZ & BICKEL Venty Modo De Empleo página 53

7.2.2 Removing the Screen
X If a Screen is clogged, it must be replaced.
X Press in the Screen, using the Filling Chamber Tool along the groove of the Filling Chamber.
Ö The Screen bulges and detaches from the groove.
X Clean the Screen with rinsing water or isopropyl alcohol.
7.2.3 Installing the Screen
X Bend the cleaned Screen beforehand or use a new Screen.
X Insert the Screen into the Filling Chamber with the curved side facing upwards.
X Press the Screen flat into the provided groove with the aid of the Filling Chamber Tool.
7.3 C leaning the Vaporizer and the USB-C cable
NOTICE
Material damage caused by improper cleaning
Ingress of water into the Vaporizer or the USB-C cable
• Do not immerse in water or other liquids.
• Do not clean with direct water or steam jet or compressed air.
X Switch off the Vaporizer
X Disconnect the Vaporizer and the USB-C cable from the mains supply
X Clean the housing of the Vaporizer and the USB-C cable only with a dry soft or damp cloth.
7 C L E A N I N G / H Y G I E N E
53