Publicidad
Idiomas disponibles
Idiomas disponibles
2
MAKE WATER SUPPLY CONNECTIONS
• Turn off hot and cold water supplies.
• Thread RED SUPPLY HOSE (1) onto HOT WATER SUPPLY (3).
• Thread BLUE SUPPLY HOSE (2) onto T-CONNECTOR (4).
• Thread T-CONNECTOR (4) onto COLD WATER SUPPLY (5).
• Firmly push the BLUE HOSE (6) in to END CAP (4).
Note: If additional supply length is required, installer must
purchase additional parts separately.
Note: If SUPPLY HOSES (1, 2) are too long, loop as illustrated
to avoid kinking.
Note: Connection on fitting supplies are 3/8" compression.
3
FILTER OUTPUT CONNECTION
• Thread hose T-CONNECTOR (1) onto HOSE (2).
• Thread hose T-CONNECTOR (1) onto HOSE (4).
• Firmly push the WHITE HOSE (5) into hose END CAP (3).
HOT
3
2
1
4
- 3 -
2
4
1
COLD
6
5
IMPORTANT: Do not
use sealent on threads
3
5
M985028 Rev. 1.0 (6/23)
Publicidad
