Publicidad
Idiomas disponibles
Idiomas disponibles
8
PREPARE FAUCET & CHECK CONNECTION FOR LEAKS
• Move HANDLE (1) into "off" position.
• Turn on water supplies and check connections for leaks.
• With HANDLE (1) in "off" position, unthread AERATOR (4) from SPRAY HEAD (2) with AERATOR KEY (5).
• Operate HANDLE (1) up and down, left and right to flush water lines thoroughly.
• Thread AERATOR (4) onto SPRAYHEAD (2) with AERATOR KEY (5).
• Press and hold the FILTER ACTIVATION BUTTON (3) for approximately 5 seconds. The filter will run for 1 minute.
Check connections for leaks.
• This concludes the installation of your filtration faucet.
2
3
4
5
CHECK
CONNECTIONS
FOR LEAKS
- 7 -
1
M985028 Rev. 1.0 (6/23)
Publicidad
