MAINTENANCE & SERVICE
FAUCET DRIPS
• Turn VALVE to OFF position.
• Operate HANDLE several times from OFF to ON position. Do not apply excessive force.
• If drips persist call customer service 1 (800) 442-1902.
LOW FLOW RATE
• Remove aerator and flush faucet.
• Turn off hot water supply.
• Unthread water supply hose.
• Check supply pipe and supply hose for debris.
• If low flow persist call customer service.
PULLDOWN HOSE NOT RETRACTING
• Check under countertop to see if the hose is
getting snagged.
• Check that the WEIGHT (1) is on the correct
side of the hose loop.
• Water Filtering System Specifications
– Rated Service Life of 300 gallons (1136 L)
– Pressure: 20 – 125 psi (0.7 – 8.6 bar)
– Temperature: 35 - 95°F (2 - 35°C)
– Flow Rate: 0.65 gpm (2.46 L/min)
• The system and installation shall comply with applicable state and local regulations.
• System tested and certified by NSF International against NSF/ANSI Standard 42 for the reduction of chlorine,
taste and odor, Particulate Class I, and against NSF/ANSI Standard 53 for the reduction of lead.
• Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection
before or after the system.
• Important Notice: Read the Manufacturer's Performance Data Sheet.
• NOTE: Use only F50 Filter Cartridge with the Saybrook Filtered Kitchen Faucet – Purchased from americanstandard-us.com
• Water Filter System to be supplied with Cold Water Only.
CLEANING:
• Clean with clear water, dry with a soft cotton flannel cloth,
NOTE: Do not clean the product with acid, polish, abrasives, harsh cleaners, or a cloth with a coarse surface.
1
- 9 -
1
System tested and certified by NSF
International against NSF/ANSI Standard
42 for the reduction of Chlorine, Taste and
Odor, Particulate Class I, and against
NSF/ANSI Standard 53 for the reduction
of Lead, and against CSA B483.1.
M985028 Rev. 1.0 (6/23)