2
4
FILTER INSTALLATION
INSTALL FILTER ON COUNTERTOP
• Insert FILTER (3) through mounting hole in countertop.
• Hand tighten MOUNTING NUT (2) to secure FILTER (3).
• Firmly push the WHITE HOSE (4) into PORT (5) labelled
"CONNECT TO FAUCET".
• Firmly push the BLUE HOSE (6) into PORT (7) labelled
"CONNECT TO FILTER".
NOTE: To remove plastic hose firmly push in the white
or blue collar at HOSE PORT (5) and pull the hose out.
INSTALL FILTER BELOW COUNTERTOP
• Secure FILTER SLEEVE (1) at a 45° degree angle below the
countertop with the four SCREWS (2) provided.
• Insert FILTER (3) into FILTER SLEEVE (1) and rotate
clockwise until tight.
• Firmly push the WHITE HOSE (4) into PORT (5) labelled
"CONNECT TO FAUCET".
• Firmly push the BLUE HOSE (6) into PORT (7) labelled
"CONNECT TO FILTER".
NOTE: Installing at a 45° angle helps to prevent drippage.
NOTE: To remove plastic hose firmly push in the
white or blue collar at HOSE PORT (5) and pull
the hose out.
7
6
3
2
6
- 4 -
- 4 -
5
4
7
5
3
1
2
M985028 Rev. 1.0 (6/23)
4