Problem
CD is not
played.
No sound
64
Possible cause
Condensation has
formed.
Incorrect CD format.
The CD is dirty or in-
correctly inserted.
The volume is set too
low.
When the device is
connected via AUX IN
or Bluetooth: The vol-
ume of the external
device is too low.
Remedy
Pull the mains plug out of the
mains outlet and wait until the de-
vice and the CD has adapted to
the environmental conditions.
The device only supports the CD
formats specified in the technical
specifications.
Clean the CD and insert it into the
CD compartment with the label
facing upwards.
Increase the volume as required.
Increase the volume on the exter-
nal device.