Vornado 293HD Guia Del Propietario página 5

GETTING STARTED
BASE ASSEMBLY
1. Loosen the pivot knob by turning counter-clockwise. Remove the
pivot knob and slip the legs of the base onto the bolts, in between
the large washer and the knob.
8
English
2. Re-install the pivot knobs onto the pivot bolts and tighten by
turning clockwise.
CLEANING
GRILLE REMOVAL
WARNING: To reduce the risk of electrical shock and injury to persons, unplug the circulator before removing grille.
1. Depress one of the grille clips by placing your thumb
against the outside surface of the clip and pressing
downward towards the motor, applying slight pressure
forward. Usually by releasing one clip, the grille can be
removed. If the grille cannot be removed, repeat the process
on remaining clips.
A flathead screwdriver can also be used if the clips are
difficult to release.
2. Replace by lining up the clips with the holes and firmly
snapping the grille back into place.
9
English