Descargar Imprimir esta página

Jonsered FR 2318 FA 4x4 Manual De Usuario página 27

Publicidad

Idiomas disponibles

Idiomas disponibles

WARNING: Remove grass, leaves and other
flammable materials from the product to
decrease the risk of fire. Let the product
become cool before you put it in storage.
Clean the product, see
16 . Repair paint damages to prevent corrosion.
Examine the product for worn or damaged parts and
tighten loose screws and nuts.
Remove the battery. Clean it, charge it, and keep it
cool during storage.
Change the engine oil, and discard the waste oil.
Empty the fuel tank. Start the engine and run it until
there is no remaining fuel in the carburetor.
Note: Do not empty the fuel tank and carburetor if a
stabilizer has been added.
Remove the plugs and put about a tablespoon of
engine oil into each cylinder. Manually turn the
engine shaft to apply the oil and put the plugs back
on.
Lubricate all grease nipples, joints and axles.
Keep the product in a clean and dry area and cover
it for more protection.
A cover for protection of your product during storage
or transport is available at your dealer.
Disposal
Chemicals can be dangerous and must not be
discarded on the ground. Always discard used
chemicals at a service center or an applicable
disposal location.
When the product is worn out, send it to the dealer
or to an applicable recycling location.
Oil, oil filters, fuel and the battery can have negative
effects on the environment. Obey the local recycling
requirements and applicable regulations.
Do not discard the battery as domestic waste.
Send the battery to a Jonsered service agent or
discard it at a disposal location for used batteries.
807 - 001 - 13.06.2018
To clean the product on page
27

Publicidad

loading