Publicidad
Idiomas disponibles
Idiomas disponibles
Product overview
7
1. Oil drain plug
2. Throttle control
3. Ignition lock
4. Cutting height lever
5. Lift lever for the cutting deck
6. Rearward pedal
7. Forward pedal
8. Parking brake pedal
9. Lock button for parking brake
10. Seat adjustment
11. Type plate
12. Lever to engage or disengage the drive system on
the front axle
13. Fuel tank cap
14. Cover lock
15. Battery
16. Lever to engage or disengage the drive system on
the rear axle
Seat safety switch
The seat safety switch starts the safety circuit when the
operator lifts from the seat. The engine and the drive to
the blades stop if the blades are engaged or the parking
brake is not applied. See also
7 .
Forward and rearward pedals
The speed is gradually adjusted with 2 pedals. The left
pedal (1) is used to move forward, and the right pedal
807 - 001 - 13.06.2018
6
8
9
10
Safety circuit on page
5
4
3
2
11
12
13
(2) is used to move rearward. The product brakes when
the pedals are released.
Control for throttle and choke
The throttle and choke control adjusts the engine speed
and engages the choke. Move the control forward to
increase the engine speed and rearward to decrease the
engine speed. Move the control to the top to engage the
choke. Use the choke to start the product when the
engine is cold. See
Cutting deck
The product is used with a 2-in-1 cutting deck with
mulch function. The mulch function cuts the grass into
fertilizer. The 2-in-1 cutting deck can also be used
without the mulch function, for rear discharge of the
grass.
1
14
15
1
2
To start the engine on page 13 .
16
3
Publicidad
