Publicidad
Idiomas disponibles
Idiomas disponibles
Care & Cleanin9
.
.
After washing, leave the lid open until the interior
is dry.
Check hoses to be sure there are no kinks or
knots.
Your washer should not be installed where
temperatures
will go below freezing, as damage to
the washer could result.
To clean, occasionally
wipe exterior with a clean
damp sponge or cloth. Do not use polish on plastic
parts.
Lifetime lubrication
is done at the factory, so your
washer never needs to be oiled or greased.
Do not lay heavy or sharp objects on top of your
washer.
.
10.
11.
The top of the washer should not be used for
removing stains from garments. Some stain
removers, such as rust remover, will mar the finish.
Remove pins, buckles or other sharp objects from
clothes to prevent scratching
interior parts.
Clothes should not be stored in washer.
Bleach, detergent,
solvents, etc. spilled on the top
of your washer that are allowed to remain will
remove the glossy finish. Remove all spills with a
damp, soft cloth.
If you close your home for the winter, have a
service technician
drain the washer. Unplug cord
from electrical
outlet and disconnect
hoses from
faucets.
Cleaning
the Interior
The interior of the washer should be cleaned
periodically
to remove dirt, soil, odor or bacteria
residue that may remain in the washer as a result of
washing
clothes. We recommend
taking the following
steps every 60 to 120 days to clean and freshen your
washer interior. The frequency
with which the washer
should be cleaned and freshened depends
on factors
such as usage, the amount of dirt, soil or bacteria being
run through your washer, or the use of cold water.
To clean and freshen the washer interior:
1.
Add a measured amount of chlorine
bleach to the
bleach dispenser, following
package directions.
2.
Add 1//4 cup of detergent
to the tub.
3.
Run the washer through
a complete
cycle using
hot water.
/4. Repeat the process if necessary.
12
Publicidad
