Publicidad
Idiomas disponibles
Idiomas disponibles
2. Reinsert the batteries. Pay attention to the correct polarity of the batteries (+/-).
After switching the scale on, you can weigh yourself as usual.
Cleaning
NOTE on material damage
− Do not immerse the scale in water or other liquids.
− Never use harsh, scouring or abrasive cleaning agents or the like to
clean the scale. Otherwise, the surface could be scratched.
1. Wipe the scale as needed with a slightly damp soft cloth.
2. Disinfect the weighing surface from time to time using a suitable disinfecting agent
(available at specialist retailers and pharmacies).
Fault/Remedy
Fault
No function
The scale appears to be displaying
wrong weighing results
"Err" is shown on the display
"Lo" is shown on the display
"C" is shown on the display
M316600 electronic Flat scale
Possible cause
‚ Are the batteries empty or inserted the
wrong way around?
‚ Is the scale located on a firm, even surface?
‚ Is a device that can cause electromagnetic
disturbances located in the vicinity of the
scale?
‚ Remove the batteries from the scale and
wait a moment. Reinsert the batteries.
‚ The maximum capacity of the scale of
200 kg has been exceeded.
‚ The batteries are empty
(see "Inserting/changing batteries").
‚ The weighing/measurement process was
faulty: The scale is not stable or you are
not standing still on the weighing surface
during weighing. Repeat the process.
Cleaning
19
Publicidad
