Publicidad
Idiomas disponibles
Idiomas disponibles
3.2 FUNCTIONS
1) KEYS
A) Temperature setting button of refrigerator compartment.
2) Display
LED 1 - Setting: COLD
LED 2 - Setting 2:
When switching on for the first time, the display panel is fully illuminated for 3
seconds and then the refrigerator operates according to setting 3.
In case of a fault, the corresponding LED flashes.
In case of no fault, the actual temperature setting of the refrigerator is displayed.
Error code
Indicators 4 and 3
Indicators 4 and 2
Indicators 4 and 1
3) Temperature setting
Each time the temperature setting button A is pressed, the temperature changes to
the next setting. Once the temperature setting is completed, the refrigerator will
start to operate according to the set value after 15 seconds.
The switching sequence is as follows:
setting 1
4) Locking/Unlocking
When the temperature control panel is locked, you must press and hold the
temperature setting key to unlock it. All LEDs will flash for 2 seconds when unlocked.
When the temperature control panel is unlocked, if no operation is performed within
15 seconds, it will automatically lock.
Max setting
position
COLDEST
COLD
LED 3 - Setting 3: COLDEST
LED 4 - Setting 4: SUPER COOL
Description of the fault
Refrigerator temperature sensor
Freezer defrosting sensor
Ambient temperature sensor
setting 2
5) ) Adjusting the damper
The temperature inside the freezer can be adjusted
by changing the position of the damper slider. Its
Damper
slider
initial position is at position A. If lower temperature
A
inside the freezer is required, you can adjust it from
the position A to left side. For better use of the
refrigerator, it is recommended to keep the damper
slider at initial position.
15
setting 3
setting 4
V.1
Publicidad
