Descargar Imprimir esta página

Craftsman 917.28852 Manual Del Operador página 28

Ocultar thumbs Ver también para 917.28852:

Publicidad

Idiomas disponibles

Idiomas disponibles

TROUBLESHOOTING CHART:
See appropriate section in manual unless directed to Sears service center
PROBLEM
Wig not start
"rd tost.rt
Engine will not
turn over
Engine clicks but'
will not start
1
2
4
5
6
7
8
9
1
2
3
4
5
6
7
,,, ,,,,,
1
2
3
_4
_5
_6
17
8
9
1
2
3
4
CAUSE
Out of fuel
Engine not "CHOKED" properly,
Engine flooded.
Bad spark plug.
Dirty air filter,
Dirty fuel filter.
Water in fuel.
Loose or damaged wiring.
Engine valves out of ad}ustment,
Dirty air filter.
Bad spark plug.
Weak or dead batter,].
Dirty fuel filter.
Stale or dirty fuel,
Loose or damaged wiring,
Engine valves out of adjustment.
Clutch/brake
pedal not depressed
Attachment
clutch is engaged,
Weak or dead battery.
Blown fuse,
Corroded battery terminals.
Loose or damaged wiring,
Faulty ignition switch,
Faulty solenoid or starter,
Faulty operator presence
switch(es),
Weak or dead battery.
Corroded battery terminals.
Loose or damaged wiring,
Faulty solenoid
or starter,
_CORRECTION
1
Fill fuel tank.
2
Sea "TO START ENGINE" in
Operation
section.
3
Wait several minutes before
attempting to start.
4
Replace spark ptug.
5
Clean/re place air filter.
6
Replace fuel filter.
7
Empty fuel tank and carburetor,
refil_ tank with fresh gasoline and
replace fuel filter,
8
Check all wiring.
9
Contact a Sears or other qualified'
service center,
1
Clean/replace
air filter,
2
RepEace spark plug,
3
Recharge or replace battery.
i 4
Replace fuel filter.
5
Empty fuel tank and refill tank with
fresh, clean gasoline.
6
Check all wiring.
7
Contact a Sears or other qualified
service center.
1
Depress clutch/brake
pedal,
2
Disengage
attachment
c}utch,
3
Recharge or replace battery.
4
Replace fuse.
5
Clean battery terminals.
6
Check all wiring,
7
Check/replace
ignition switch,
8
Check!replace
solenoid or starter.
9 ' Contact a Sears or other qualified
service center.
1
Recharge or replace battery.
2
Clean battery terminals,
3
Check all wiring,
4
Check/replace
solenoid
or starter.
28

Publicidad

loading