Craftsman 917.28852 Manual Del Operador página 31

TROUBLESHOOTING CHART:
See appropriate section in manual unless directed to Sears service center
PROBLEM cAusE
Loss of drive 1 Freewheel control in
"DISENGAGED" position,
2 Debris on steering plate (if 2
equipped).
,3 Motion drive belt worn, damaged, 3
or broken,
4 Air trapped in transmission during 4
shipment or servicing,
5 Axle key missing.
Engine "backfires"
when zurnin_q
engine "OFF"
Engine dies when
tractor is shifted
into reverse
1 Engine throttle control not se_ 1
between half and full speed (fast}
position before stopping engine,
1 Reverse operation system (ROS) _1
is not "ON" while mower or other
attachment is engaged,
CORRECTION
Place freewheel control in
"ENGAGED" position,
See "GLEANING" in the
maintenancesection,
Replace motion drive belt.
Purge transmission,
Install axle key at rear wheel See
"TO REMOVE WHEEL" in the
Service and Adjustments section,
Move throttle control between
half and full speed (.fast) position
before stopping engine,
Turn ignWon key to ROS "ON"
position, See OperatLon section,
N£ED MORE HELP?
You'[[ find the answerand more on managemyhorae.com - fo_free!
_I
• Find this and a_[your other product manuals online. _i
, Get answers from our team of home experts. _i
• Get a personalized maintenance p[an for your home, _i
• Find information and tools to
hetp
with home projects, _
g Y Y
31