Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
To install the unit and the display securely, be sure
to follow the steps to in order.
Removing the trim ring and the mounting sleeve
(page 17)
Before mounting the unit (page 17)
Mounting the unit in the dashboard (page 18)
Setting up the display (page 18)
Making sure the mounting positions of the
display (page 21)
Attaching the display to the unit (page 21)
For your safety
After mounting the display to the unit, make sure
that the display does not interfere with normal
driving operations such as blocking the driver's
view or getting the cables tangled.
Removing the trim ring and the
mounting sleeve
Before installing the unit, remove the trim ring
and the mounting sleeve from the unit.
1
Pinch both edges of the trim ring , then
pull it out.
2
Insert both release keys until they click,
and pull down the mounting sleeve
pull up the unit to separate.
Face the hook
inwards.
, then
Before mounting the unit
Before mounting the unit in the dashboard, arrange
the USB extension cables.
1
Connect the USB Type-C extension cable
to the USB port.
2
Tighten the screw firmly on the USB cable
holder to secure the USB Type-C
extension cable .
3
Route the USB Type-C extension cable
inside the dashboard.
17
GB
Publicidad
