Maintenance And Storage - Omron HCG-801 Manual De Instrucciones

• Clean the unit with a cloth dampened with water or mild detergent.
Then wipe it dry with a dry cloth. Do not wipe the SD memory card
slot cover.
• Wipe the electrodes using a cloth dampened with disinfectant alcohol.
• Do not wipe the unit with benzene, gasoline, paint thinner, concentrated
alcohol, or other volatile detergents.
• Do not place objects on top of the unit. This could damage the unit.
• Do not disassemble the unit. There are no user serviceable parts.
Repairs should only be carried out by Omron authorized personnel.
• This unit does not require calibration during its expected life cycle.
CAUTION: Do not sterilize the unit in an autoclave, ultraviolet sterilizer or gas sterilizer
(EOG, formaldehyde, high density ozone, etc.)

MAINTENANCE AND STORAGE

56