cecotec READYWARM 2050 MAX FORCE ROTATE Manual De Instrucciones página 36

ENGLISH
1. PARTS AND COMPONENTS
Fig. 1
1. Temperature knob
2. Power level knob
3. Indicator
4. Oscillation switch
NOTE:
The graphics in this manual are schematic representations and may not exactly match the
device.
2. BEFORE USE
- This device is packaged in a way as to protect it during transport. Take the device out
of its box and remove all packaging materials. You can keep the original box and other
packaging elements in a safe place. This will help you prevent damage to the device when
transporting it in the future. In case the original packaging is disposed of, make sure all
packaging materials are recycled accordingly.
- Make sure all parts and components are included and in good conditions. If there is any
piece missing or in bad conditions, contact the official Cecotec Technical Support Service
immediately.
3. OPERATION
NOTE
It is normal that when you switch on the fan heater for the first time, or when you switch it on
after it has not been used for a long period of time, it will emit some odour and smoke. This
will disappear when the fan heater has been on for some time.
Power level knob
- Switch off: position 0.
- Ventilation mode: select the first position.
Heating at reduced power: turn the selector to the second position.
-
- Full power heating: turn the selector to the third position.
Temperature knob
Turn the temperature knob anticlockwise to increase the temperature or clockwise to
decrease it.
36
ReadyWarm 2050 Max Force Rotate White