Publicidad
Idiomas disponibles
Idiomas disponibles
Operating Instructions
First Use
Initial startup requires no adjustments. When plugged in, the unit will begin operating under the factory default settings. If the unit
was turned off during installation, simply press
NOTICE: Temperature displayed refl ects actual temperature inside unit.
If the temperature displayed is diff erent than selected, the unit is progressing towards the selected temperature. Time to reach set
point varies based upon ambient temperature, temperature of product loaded, door openings, etc. Viking recommends allowing
the unit to reach set points before loading.
Control Operation
CONTROL FUNCTION GUIDE
FUNCTION
ON/OFF
Adjust Temperature
Toggle between º F / º C
Leave interior light on
Hide Display
Adjust light color
Enable Sabbath Mode
Disable Sabbath Mode
Showroom Mode
DOOR ALERT NOTIFICATION
When the door is left open for more than 5 minutes:
•
A tone will sound for several seconds every minute
•
will appear in display
•
Closed door to silence alert and reset
and the unit will immediately switch on. To turn the unit off , press
Hidden
Button
COMMAND
Press
and release
Press
or
and release
Hold
and
for 5 seconds
Press
and release to leave interior light on
for 12 hours; press again to deactivate
Hold hidden button and press
While holding
press and release
scroll through lighting options
Press
and hold for 5 seconds and release
Press
and release
Hold
and
for 5 seconds
NOTES
Unit will immediately turn On or OFF
When the display is fl ashing, press
set point temperature. Note: temperature displayed is the
actual temperature inside unit
The display will change units
After 12 hours, factory default is restored; light will turn on
when door is open
Display will turn off when door is closed. Unit will continue
to operate. Repeat command to turn on display
Option
Open Door
00
01
to
02
Light will be set at full intensity when door is open, and 50%
intensity when door is closed.
The o F / o C symbol will fl ash briefl y after 5 seconds. Interior
light and display will go dark and remain so until user resets
mode - unit continues to operate
Display and interior light return to normal operation
The º F / º C symbol will fl ash. Display will be lit and interior
light will function. Unit will not cool. Repeat command to
return to normal operation
This unit is Star-K certifi ed. See www.star-k.org for more details.
10
or
to adjust the
Closed Door
White
White
Blue
Blue
White
Blue
.
Publicidad
