Maytag WT-TOD Guia Del Usuario página 13

LEVELING LEGS
TRICAL
CONNECTION
REMOVAL OF
GAS APPLIANCE
Appliances which require electrical
power are equipped with a three-
_Be sure the anti.tip bracket se_
cures one ofth e rear leveling legs prong grounding plug which must be
plugged directly into a properly
to the floor to prevent the range grounded three-hole 120 volt electrical
from accidentally tipping, outlet.
The range should be leveled when in-
stalled. If the range is not
level, turn the plastic lev-
eling legs, located at each
corner of the range, until
range is level.
ANTI-TIP BRACKET
ELEC-
L-EVELING LEG
Always discon-
nect power to
appliance
before servicing.
The three-prong grounding plug
offers protection against shock haz-
ards. Do not cut or remove the third
grounding prong from the power
cord plug.
Gas appliance connectors used to
connect this appliance to the gas sup-
ply are not designed for continuous
movement. Once installed, DO NOT
repeatedly move this gas appliance for
cleaning or to relocate. If this appli-
ance has to be moved and/or removed
for servicing, follow the procedure
described in the installation instruc-
tions. For information contact Maytag
Customer Service at 1-800-888-9900.
To prevent range from accidently tip-
ping, range must be secured to floor by
sliding the rear leveling leg into the
anti-tip bracket.
If an ungrounded, two-hole or other
type electrical outlet is encountered, it
is the personal responsibility of the
appliance owner to have the outlet
replaced with a properly grounded
three-hole electrical outlet.