Maytag HAVS-1 Guía De Uso Y Cuidado página 7

Ocultar thumbs Ver también para HAVS-1:

Idiomas disponibles

Control features vary by model.

Select Cycle

To select a cycle, push the control dial IN (off position}

and turn it to the right (clockwise}

until the pointer is

at the soil level needed for the wash load in the

Regular, Permanent Press or DeJicates cycles.

Regular

Fabrics

Cycle

Provides normal agitation and fast spin speeds to wash

cottons and heavily soiled items. For maximum

cleaning, set the dial at Extra Heavy.

Perraaaeat

Press Cyde

Provides normal agitation speed for six minutes, a

pause, then slow agitation

for the remainder

of the

wash cycle to protect permanent

press fabrics. Spin

speed will be fast to reduce water retention.

Ddicates

Cycle

Provides slow agitation

speed and slow spin speed for

delicates

and knits.

Pull Control Dial Out to Start

You may stop the washer at any time by simply

pushing the control dial IN. Therefore it is possible to

obtain a non-agitated

soak or to shorten, skip or

repeat any part of a cycle. The control dial must be

pushed IN (off position} when you change the setting.

Note

• Do not attempt to turn the control dial

counterclockwise.

Damage to the timer will result.