Publicidad
Idiomas disponibles
Idiomas disponibles
a
The Al edit recording
function
enables
CD recording
without
worrying
about
tape
length
and track
length.
When
a CD is
inserted,
the unit automatically
calculates
the total track length.
If necessary,
the order of tracks is rearranged
so that no track is
cut short.
(Al: Artificial
Intelligence)
m
Al edit recording
will not start from a point halfway
into the tape.
The tape must be recorded
from the beginning
of either side.
1
2
3
4
5
Insert the tape into deck 2.
Insert the tape with the side to be recorded
on first facing out
from the unit.
Press CD and load the disc(s).
Press CD EDIT/CHECK
~.
When using the remote control,
press CD EDIT/CHECK
once
while pressing
SHIFT.
"EDIT"
is displayed.
EDIT
When "PRGM"
is displayed,
press CD EDIT/CHECK.
Press DISC DIRECT PLAY 1-3 to select a disc.
Press
numbered
buttons
O-9 on the remote
control to designate
the tape length.
10 to 99 minutes
can be specified.
Example:
When using a 60-minute
tape, press 6 and O.
In a few seconds,
the tracks to be recorded
on each side of
the tape are determined.
+,
W
or MULTI
JOG are also available
to designate
the tape length.
Tape length
Remaining
time
Programmed
of recording
tracks for side A
6 Press
REC/REC
MUTE to start recording
on
the first side.
The tape is rewound
to the beginning
of the front side, the
lead segment
is played through for 10 seconds,
and recording
starts.
When
recording
on the front (side A) ends, recording
on the back (side B) starts.
To stop
recording
Press W. Recording
and CD play stop simultaneously.
To clear
the edit program
Press
CLEAR
twice so that "EDIT" disappears
on the display.
To
check
the order
of the programmed
track
numbers
Before recording, press CD EDIT/CHECK
to select side A or B,
and press +
or >
repeatedly.
Programmed
Track number
track numbers
Tape side
Program
number
To
add tracks from other discs to the edit program
If there is any time remaining
on the tape after step 5, you can
add tracks from other discs in the CD compartment
.
1
Press CD EDIT/CHECK
to select side A or B.
2
Press DISC DIRECT
PLAY 1-3 to select a disc.
3
Press numbered
buttons on the remote control to select tracks.
A track whose playing
time is longer than the remaining
time
cannot
be programmed.
4
Repeat
steps 2 and 3 to add more tracks.
Time
on cassette
tapes
and editing
time
The actual cassette
recording
time is usually
a little longer than
the specified
recording
time printed
on the label.
This unit can
program
tracks to use the extra time.
When the total recording
time is a little longer
than the tape's
specified
recording
time
after editing,
the display
shows the extra time (without
a minus
mark), instead
of the time remaining
on the tape (with the minus
mark).
m
The Al edit
recording
function
cannot
be used
with
discs
containing
31 tracks or more. "TR OVER"
is displayed
if this is
attempted.
Recording
is inhibited
if the erasure
prevention
tab on either
side of the tape is broken off.
!
Tape side
A: First recording
side
B: Second
recording
side
22
ENGLISH
Publicidad
