Publicidad
Idiomas disponibles
Idiomas disponibles
I
F
CD DIGITAL OUT
(OPTICAL)
m
f
1
VIDEO/AUX
Refer to the operating
instructions
of the connected
equipment
for details.
The connecting
cords are not supplied.
Obtain
the necessary
connecting
cords.
Consult
your local Aiwa dealer for optional
equipment.
This unit can input analog
sound signals
through
these jacks.
Use a cable with RCA phono plugs to connect
audio equipment
(turntables,
LD players,
MD players, VCRs, TV, etc.).
Connect
the red plug to the VIDEO/AUX
R jack, and the white
plug to the VIDEO/AUX
L jack.
When connecting a turntable
Use an Aiwa turntable
equipped
with a built-in equalizer
amplifier.
This jack is recommended
to connect
with an MD player.
Use a cable with RCA phono plugs.
Connect
the red plug to the MD R jack, and the white plug to the
MD L jack.
This unit can output analog
sound signal through
these jacks.
Use a cable with RCA phono plugs to connect
audio equipment
with LINE IN (analog
input) jacks.
Connect
the red plug of a cable to LINE OUT R jack, and the
white plug to LINE OUT L jack.
m
Do not connect
an equipment
to LINE OUT jacks and VIDEO/
AUX jacks simultaneously.
Otherwise,
noise
is generated
and
malfunction
occurs.
This unit can output
CD digital
sound signals
through
this jack.
Use an optical
cable to connect
digital
audio
equipment
(DAT
deck, MD recorder,
etc.).
Remove the dust cap @ from the CD DIGITAL
OUT (OPTICAL)
jack. Then,
connect
an optical
cable
plug to the CD DIGITAL
OUT (OPTICAL)
jack.
Connect optional surround speakers with the 8 ohms to 16 ohms
impedance
to the jacks.
MD
To play a equipment
connected
to VI DEO/AUX
jacks or MD jacks
proceed
as follows.
1 Press VIDEO/AUX
or MD.
To play the equipment
connected
to VI DEO/AUX,
press
VIDEO/AUX.
"VIDEO
appears
on the display.
To play the equipment
connected
to MD, press
MD. "MD
appears
on the display.
2 Play the connected
equipment.
To
change
a source
name
in the display
When VIDEO/AUX
is pressed,
"VIDEO
is displayed
initially.
It
can be changed
to "AUX
or "TV.
With the power on, press POWER
while pressing
VIDEO/AUX.
Repeat
the procedure
to select one of the names.
To
adjust
the sound
level of the external
source
When the sound
level of the external
source
is much higher
or
much lower than that of other function sources, adjust it as follows.
1
Press VIDEO/AUX
or MD and play the equipment.
2
Presss +
or >
so that the sound level becomes
the same
as that of other function
sources.
m
During
recording,
the sound level can not be adjusted.
When
the CD DIGITAL OUT (OPTICAL) jack is not being
used
Attach the supplied
dust cap.
28
ENGLISH
Publicidad
