Publicidad
Idiomas disponibles
Idiomas disponibles
PRODUCT UNIT DIAGRAM
1
2
3
5
6
4
6
7
7
8
1. Freezer Section
2. Freezer Shelf
3. Freezer Temp Control
4. Refrigerator Section
5. Fridge Temp Control
6. Fridge Shelves
Note: The above picture is for reference only.
DOOR HANDLE INSTALLATION
Before attaching the handle, please determine which way
you would like the door to open (see the next section).
The refrigerator must be disconnected before attempting
the installation of the door handles. You will need a Phil-
lips screwdriver for this.
1.
Remove the handle pieces from the bag.
There are two handle bases and two handle covers.
9
10
7. Veggie Crispers w/
Glass Cover
8. Leveling legs
9. Freezer Door and bins
10. Fridge Door and Bins
–5–
2.
Unscrew the two screws on the upper
(freezer) door (according to the swing direc-
tion).
3.
Combine the handle base with the screws.
Then, tighten the screws properly.
4.
Lock the handle cover in place on the base.
5.
Perform the same steps for the lower (refrige-
rator) door.
DOOR SWING REVERSAL (OPTIONAL)
Prior to installing and turning on your refrigerator, make
sure you determine if you'd like to reverse the way the
door opens. You will need a Phillips screwdriver to do
this.
Note: These instructions are for changing the hinges
from the right side to the left side. If you wish to change
the hinges back to the right side, follow these same in-
structions and reverse all references to left and right.
Publicidad
