Publicidad
Idiomas disponibles
Idiomas disponibles
CAUTION!
TO AVOID INJURY TO YOURSELF AND/OR
PROPERTY, WE RECOMMEND SOMEONE ASSIST YOU
DURING THE DOOR REVERSAL PROCESS. MAKE SURE
THE APPLIANCE IS UNPLUGGED.
Note: If you lay your refrigerator on its back or side for
any length of time, wait for six hours after you stand it up
again before you plug it in. Otherwise, you may damage
internal components.
• Ensure the appliance is unplugged and empty.
• Adjust the two leveling feet to their highest position.
• Have something solid against which to rest the appli-
ance. This will be necessary when it comes to taking
off the door.
• Avoid laying the refrigerator completely flat on its back
as this may damage the cooling system.
STEP 1: REMOVE THE FREEZER DOOR FIRST
Using a flathead screwdriver, gently pry and lift the right
top hinge cover and the left cover plate. Use a Phillips
screwdriver to unscrew the screws of the right top hinge.
Remove the upper hinge and lift the freezer door up-
ward to detach it.
STEP 2: REMOVE THE REFRIGERATOR DOOR
Unscrew the three screws holding the center hinge with a
Phillip's screwdriver. Remove the hinge and save the
screws and hinge. Raise the refrigerator door upward,
as shown.
STEP 3: REPLACING THE BOTTOM HINGE
a. Unscrew the two screws holding the bottom hinge and
remove the bottom hinge from the bottom right side of
the refrigerator.
b. Unscrew the hinge pin from the right side of the bottom
hinge and move it to the left side of the refrigerator.
c . Secure the bottom hinge to the bottom left side of the
refrigerator, using the screws you removed previously.
b
a
STEP 4: REFITTING THE DOOR HARDWARE
a. Remove the plastic bushing from the top right side of
both the freezer and fridge doors.
b. Remove the hole plug from the top left of the refriger-
ator door and insert it in the top right side of the refriger-
ator door.
c. Remove the aid-closer from the bottom-right of the two
doors and install the aid-closer on the bottom-left.
–6–
c
Publicidad
