Publicidad
Idiomas disponibles
Idiomas disponibles
Installation and Use
Step 1
All components of PFAS must be selected and
deemed compatible with SRL by a Competent
Person.
Step 2
Ensure structure to which SRL is attached,
and on which work is performed, is free of all
hazards, including, but not limited to, debris, rot,
rust, sharp or abrasive edges and surfaces, and
hazardous materials.
Step 3
Ensure 100% tie-off will be maintained at all
times, which may require the use of a backup or
supplementary fall protection system.
Step 4
Attach CR3-EDGE SRL to compatible anchorage
connector as determined by jobsite Competent
Person.
WARNING!
Snap hook end must be
connected to harness dorsal D-ring.
Specifications
User weight range (including all
clothing, tools, and equipment):
ANSI:
130 - 310 lb (59 - 141 kg)
OSHA(LE):
100 - 310 lb (45 - 141 kg)
OSHA(Non-LE):
100 - 420 lb (45 - 191 kg)
Class 2 SRL (per ANSI)
Maximum Arrest Force: 1,800 lb (8 kN)
Average Arrest Force: 1,350 lb (6 kN)
Maximum Arrest Distance:
Non-LE: 3 ft 6 in (1,1 m)
LE: 8 ft 6 in ft (2,6 m)
Part #
Length
4200221
33 ft (10 m)
Description
CR3-EDGE, Class 2, Galvanized Steel Cable with Steel Snap Hook
See Diagram A on page 9.
Minimum Required Fall Clearance:
Non-LE: 7 ft (2,1 m)
LE: 17 ft (5,2 m)
Permitted Service Temperature Range:
-40°F to 130°F (-40°C to 54°C)
Note: Non-LE = Anchor at or above D-ring height
Materials
13/64 in (5,3 mm) Galvanized Steel cable,
polyolefin, polyester.
4
Swivel Top Connection Point
Housing
Lifeline Handle
Shock Pack
Snap Hook Connector
Publicidad
