Publicidad
Idiomas disponibles
Idiomas disponibles
Labels
1
33 ft (10 m) Self-Retracting Lifeline
ANSI Z359.14-2021
Se puede utilizar en aplicaciones borde expuesto
2
Part #
4200221
Read supplied instructions before using. Failure to follow instructions
may result in serious injury or death. Never modify product. This product is not repairable.
USE This device is only for use by one person as
a fall arrester. Only make connections directly
to attachment point on safety harness. Guard
against swing-fall by keeping lifeline vertically
overhead. Ensure that connection to anchorage
is secured properly before use. Avoid lifeline
contact with sharp or abrasive edges and
surfaces. May be used as a component of a
PFAS in HLL applications. Design, installation,
and utilization of HLLs must be supervised by
a Qualified Person. Suitable for horizontal use.
Competent Person must calculate fall clearance
prior to use; fall clearance calculations must
include considerations for swing fall. Clearance
numbers specified based on lifeline installed
vertically overhead and in-line with worker.
Inspection
Date
Initials
Date of First Use
Permitted Service Temperature Range:
-40°F to 130°F (-40°C to 54°C)
Type: SRL
DO NOT REMOVE
White
C0 M0 Y0 K0
R255 G250 B250
Class
2
Anchor above or
below dorsal D-ring
CR3-EDGE
|
OSHA 1926.502 & 1910.140
Suitable for
LEADING EDGE
PANTONE® Process Black
C0 M0 Y0 K0
R0 G0 B0
#000000
Label Stock:
MacTac REBEL 4MIL MATTE PVC HT PRINT RB528H
Date of Manufacture
Lot #
MM
YY
|
Laminate:
MacTac PERMAFLEX 5MIL LUSTRE CLEAR PVC PERM LAM PF6315
INSPECTION Prior to each use, check locking (pull
sharply to test) and retraction function. Inspect for
signs of deployment, defects or damage to housing,
lifeline (inspect full length), connectors, or missing
parts. Inspect impact indicator - see instruction manual.
Ensure presence and legibility of all labels. Inspection
by Competent Person required at least every 12 months.
Immediately remove from service in event of failed
inspection, or if unit is subjected to a fall.
Lifeline Material: Galvanized Steel
User Weight Range (including tools and equipment):
ANSI: 130-310 lb (59-141 kg)
Arrest Force: Max. 1,850 lb (8 kN)
Non-LE Use - (Anchor at or above dorsal D-ring):
Capacity Range: 100-420 lb (59-191 kg)
Maximum Arresting Distance: 3 ft 6 in (1,1 m)
Maximum Free Fall: Not Permitted
Fall Clearance: 7 ft (2,1 m)
LE Use - (Anchor below dorsal D-ring):
Capacity Range: 100-310 lb (45-141 kg)
Min. Setback Distance From Edge: 0 ft
Maximum Arresting Distance: 8 ft 6 in (2,6 m)
Maximum Free Fall: 5 ft (1,5 m)
Fall Clearance: 17 ft (5,2 m)
Tested and
Assembled
in USA.
LABELS
guardianfall.com
1
Class 2
Anchor above or below dorsal D-ring
CR3-EDGE
Self-Retracting Lifeline
ANSI Z359.14-2021 | OSHA 1926.502 & 1910.140
Suitable for leading edge use
2
Part # | Date of Manufacture: | Lot # | Serial #
WARNING Read supplied instructions before using.
Failure to follow instructions may result in serious injury
or death. Never modify product. This product is not
repairable.
USE This device is only for use by one person as a fall
CUT LINE 6.2"
arrester. Only make connections directly to attachment
point on safety harness. Guard against swing-fall
by keeping lifeline vertically overhead. Ensure that
connection to anchorage is secured properly before use.
Avoid lifeline contact with sharp or abrasive edges and
surfaces. May be used as a component of a PFAS in HLL
applications. Design, installation, and utilization of HLLs
must be supervised by a Qualified Person. Suitable for
horizontal use. Competent Person must calculate fall
clearance prior to use; fall clearance calculations must
include considerations for swing fall. Clearance numbers
specified based on lifeline installed vertically overhead and
in-line with worker.
INSPECTION Prior to each use, check locking (pull
sharply to test) and retraction function. Inspect for signs
PANTONE® 7549
of deployment, defects or damage to housing, lifeline
C0 M32 Y100 K0
R253 G181 B21
(inspect full length), connectors, or missing parts. Refer
#FCB414
to instruction manual for checking snap hook deployment.
Ensure presence and legibility of all labels. Inspection
by Competent Person required at least every 12 months.
Immediately remove from service in event of failed
inspection, or if unit is subjected to a fall.
Lifeline Material: Galvanized Steel | Length: 33 ft (10 m)
Serial #
User Weight Range (including tools and equipment):
ANSI: 130-310 lb (59-141 kg) | OSHA: 100-420 lb (45-191 kg)
Arrest Force: Max: 1,800 lb (8 kN) | Avg: 1,350 lb (6 kN)
(Non-LE Use - Anchor at or above dorsal D-ring):
Capacity Range: 100-420 lb (59-191 kg)
Max. Arresting Distance: 3 ft 6 in (1,1 m)
|
Length: 33' (10 m)
Max. Free Fall: Not Permitted
|
OSHA: 100-420 (45-91 kg)
Fall Clearance: 7 ft (2,1 m)
|
Avg. 1,350 lb (6 kN)
(LE Use - Anchor below dorsal D-ring):
Capacity Range: 100-310 lb (45-141 kg)
Min. Setback Distance From Edge: 0 ft
Max. Arresting Distance: 8 ft 6 in (2,6 m)
Max. Free Fall: 5 ft (1,5 m)
Fall Clearance: 17 ft (5,2 m)
Type: SRL
DO NOT REMOVE LABELS
Designed and Tested in USA. Made in Taiwan.
6
Part #
4200221
Read supplied instructions before using. Failure to follow ins
may result in serious injury or death. Never modify product. This product is no
USE This device is only for use by one person as
a fall arrester. Only make connections directly
to attachment point on safety harness. Guard
against swing-fall by keeping lifeline vertically
overhead. Ensure that connection to anchorage
is secured properly before use. Avoid lifeline
contact with sharp or abrasive edges and
surfaces. May be used as a component of a
PFAS in HLL applications. Design, installation,
and utilization of HLLs must be supervised by
a Qualified Person. Suitable for horizontal use.
Competent Person must calculate fall clearance
prior to use; fall clearance calculations must
include considerations for swing fall. Clearance
numbers specified based on lifeline installed
vertically overhead and in-line with worker.
Inspection
Date
Initials
Date of First Use
Permitted Service Temperature Range:
-40°F to 130°F (-40°C to 54°C)
Type: SRL
DO NOT REMOVE
White
C0 M0 Y0 K0
R255 G250 B250
#FFFFFF
Date of Manufacture
Lot #
MM
YY
|
INSPECTION Prior to each use, c
sharply to test) and retraction f
signs of deployment, defects or
lifeline (inspect full length), co
parts. Inspect impact indicator - s
Ensure presence and legibility o
by Competent Person required a
Immediately remove from serv
inspection, or if unit is subjected to
Lifeline Material: Galvanized Steel
User Weight Range (including tool
ANSI: 130-310 lb (59-141 kg)
Arrest Force: Max. 1,850 lb (8 kN)
Non-LE Use - (Anchor at or above d
Capacity Range: 100-420 lb (59-191
Maximum Arresting Distance: 3 ft
Maximum Free Fall: Not Permitted
Fall Clearance: 7 ft (2,1 m)
LE Use - (Anchor below dorsal D-ri
Capacity Range: 100-310 lb (45-141
Min. Setback Distance From Edge:
Maximum Arresting Distance: 8 ft 6
Maximum Free Fall: 5 ft (1,5 m)
Fall Clearance: 17 ft (5,2 m)
Tested and
Assembled
in USA.
LABELS
guardianfall.com
Seri
|
|
OSHA:
|
Publicidad
