CASO DESIGN M 20 Ceramic Gourmet Manual Del Usuario página 44

DE
Metal sheet
EN
Metal rack
FR
Metal container
IT
Aluminium foil and container
ES
5.4 Opening / closing door
NL

Open door
RUS
Pull the door handle with a slight tug to open the door of the device. If the device is
SV
switched on, the current cooking programme will be interrupted.
PLEASE NOTE

Leave the door open for a moment before reaching into the cooking chamber, to
allow the accumulated heat to escape.

Close doors
Close the door until the door latch audibly locks in place. If a cooking programme in
progress has been interrupted by opening the door, press the „Start/Quickstart" button
again to continue the cooking process.
5.5 Setting the time
You can set the time on the appliance in the 24-hour system. To do this, the appliance
must be in standby mode.
1.
Press the „Time/Sound" button twice.
2.
Turn the control knob forwards or backwards to set the desired hour.
3.
Press the „Time/Sound" button again to confi rm this setting.
4.
Turn the control knob forwards or backwards to set the desired minutes setting.
5. Confi rm your setting by pressing the „Time/Sound" button.
PLEASE NOTE

You can display the time at any time during the cooking process. To do this, press the
„Time/Sound" button.
5.6 Setting the timer
You can set a kitchen timer on the appliance. To do this, the appliance must be in standby
mode.
1.
Press the „Time/Sound" button.
2. Turn the control knob forwards or backwards to set the desired timer time.
3.
Press the „Start/Quickstart" button to confi rm your setting.
4.
The timer time starts to count down.
5.
When the timer time has elapsed, the appliance beeps 5 times.
44 CASO M 20 Ceramic Gourmet



