Adjusting The Air Flow Direction - Sharp AY-XP18GR Manual De Instrucciones

ADJUSTING THE AIR FLOW DIRECTION

VERTICAL AIR FLOW DIRECTION
MODE 1h
CLEAN
FAN
SWING
SET/C
HORIZONTAL AIR FLOW DIRECTION
Hold the horizontal adjustment
louvre as shown in the diagram
and adjust the air flow direction.
CAUTION
Never attempt to adjust the vertical adjustment louvre manually.
• Manual adjustment of the vertical adjustment louvre can cause the unit to malfunction
when the remote control is used for adjustment.
• When the vertical adjustment louvre is positioned at the lowest position in the COOL or
DRY mode for an extended period of time, condensation may result.
Do not adjust the horizontal adjustment louvre to the extreme left or right in the COOL mode
with the fan speed set to "SOFT (
Condensation may form on the louvres.
Press the SWING button on the remote
1
control once.
• The vertical adjustment louvre will change its
angle continuously.
Press the SWING button again when the
2
1
vertical adjustment louvre is at the desired
position.
2
• The louvre will stop moving within the range
shown in the diagram.
• The adjusted position will be memorized and
will be automatically set to the same position
when operated the next time.
COOL and DRY modes
)" for an extended period of time.
E-10
Adjustment range
HEAT mode