Adjusting The Air Flow Direction; Plasmacluster Operation - Sharp AY-XPM7PHR Manual De Instrucciones

ADJUSTING THE AIR FLOW
DIRECTION
VERTICAL AIR FLOW DIRECTION
1
Press the SWING button (
• The vertical airfl ow louvre will swing.
2
Press the SWING button (
to stop at the desired position.
CAUTION:
Never attempt to adjust the louvres manually.
• Manual adjustment of the louvres can cause
the unit to malfunction.
• When the vertical adjustment louvre is posi-
tioned at the lowest position in the COOL or
DRY mode for an extended period of time,
condensation may result.
NOTE:
• The adjustment range is narrower than the
SWING range in order to prevent condensa-
tion from dripping.
HORIZONTAL AIR FLOW DIRECTION
Hold the horizontal airfl ow louvre link
and adjust the air fl ow direction.
Louvre lever

PLASMACLUSTER OPERATION

The Plasmacluster ion generator inside
the air conditioner will release positive and
).
negative Plasmacluster ions into the room
to reduce airborne mold.
1
During operation, press the PLAS-
) again
MACLUSTER button.
1 • The remote control will display "
• The blue PLASMACLUSTER lamp will
2
light up.
TO CANCEL
Press the PLASMACLUSTER button again.
• The blue PLASMACLUSTER lamp will turn off.
NOTE:
• Use of the PLASMACLUSTER operation will
be memorized, and it will be activated the next
time you turn on the unit.
• To perform Plasmacluster operation in FAN
only mode, press the PLASMACLUSTER but-
ton when the unit is not operating.
The mode symbol of the remote control will go
off and the fan speed cannot be set to AUTO.
• Plasmacluster is Sharp's original technology.
For more information, please visit:
http://www.sharp-pci.com/en/
GB-7
".
1