embrace TALK Manual De Usuario página 14

passing the 12 this will change (AM to PM) or (PM to AM). When the
desired hour and AM or PM is reached press and release the middle
button to set the correct hour and if it's AM or PM.
Step 8: Set Minutes
The current minutes will flash. If the talking feature
is on, the Monitor will say, "Set Minutes". Press and
release the top or bottom button to the desired minute.
Press and release middle button to set the minutes.
NOTE:
• Anytime during set up, inserting a Embrace TALK Test Strip will
begin testing. Any changes made so far will be stored.
• You may need to reset the Year, Date and Time after changing the
batteries.
After date and time have been set, the monitor will announce the year,
date and time if the talking feature is on. Begin testing by inserting an
Embrace TALK Blood Glucose Test Strip (see page 29, Testing Your
Blood Glucose), or press and hold the middle button to turn off the
monitor, or see the next section on how to set up the alarm feature on
your monitor.
Blood Glucose Monitoring System
13