Publicidad
Idiomas disponibles
Idiomas disponibles
TOOLS NEEDED
17mm Combination Wrench
10mm Combination Wrench (2)
Flat Head Screwdriver
Phillips Screwdriver
DO NOT attempt to modify this Tool or create accessories not recommended for use with this Tool. Any such alteration or
•
modification is misuse and could result in a hazardous condition.
•
DO NOT connect to power supply until assembly is complete. Failure to comply could result in accidental starting.
•
DO NOT start the Miter Saw without checking for interference between the Blade and the Miter Fence. Damage could result to
the Blade if it strikes the Miter Fence during operation of the Saw.
ALWAYS recheck for interference when changing the miter angle.
•
•
ALWAYS secure this Saw to a stable work surface before any use. The Saw can tip over if the Saw Head is released suddenly
and the Saw is not secured to a work surface.
•
DO NOT operate this Tool if any parts are damaged or missing until the parts are replaced. Please call DELTA
at (toll free) 1-800-223-7278.
ASSEMBLY
T25 Torx Wrench
T20 Torx Wrench
4mm Hex Wrench
(for brush replacement)
(for the dust port adapter)
Framing Square
Combination Square
Figure 4
12
Customer Service
®
Publicidad
