Publicidad
Interference
Curves, T-fittings
noise
and currents
POSSIBLE DEVICE PROBLEMS
You can find information on possible device problems and how to rectify them at
www.isafe-mobile.com/en/support/service under the menu item "FAQ".
If you have any further questions, please contact the i.safe MOBILE GmbH repair service at
www.isafe-mobile.com/en/support/service
You can find help on how to use the Senseven App at www.senseven.ai
14
Locate the source of the noise. Then carry out the
measurement with 5 measuring points. Set the first or
last measuring point closer to the noise source.
If the signal gets stronger in the direction of the noise
source, it indicates a source of interference (curves,
T-fittings and currents).
Repeat the measurement and observe the trend in the
trend view
(see Backoffice/Cloud https://cloud.senseven.ai).
If the signal weakens over time, the process is stabi-
lizing.
Do not measure again until the process is stable.
Publicidad
