Bell & Ross BR 03 GYROCOMPASS Manual página 3

ENGLISH
BR 03 GYROCOMPASS
LTD 999 PCS
BR-CAL.302
mechanical with automatic winding. Calibre BR-CAL.302. Power
Movement:
reserve approximately 54 hours.
Functions:
with quickset. Time-setting with hacking function.
GENERAL USAGE
When the watch has stopped (crown in position 0): wind the
Starting the watch.
movement by rotating the crown clockwise. After approximately 71 rotations, the
watch is fully wound (the winding mechanism does not have a stop to prevent
overwinding). The power reserve is approximately 54 hours when fully wound.
When the watch is worn , the automatic mechanism will wind the movement.
A
B
C
D
(x4)
E
STRAP MOUNTING
Attachments with no visible screws (E)
A spring bar is used to fit the strap to the case attach-
ments. This bar must be removed carefully using the
appropriate tool provided with the watch in the box.
IMPORTANT
*Quickset date setting. As with all mechanical watches with a date function,
quickset date setting (crown in position 1) MUST NOT UNDER ANY CIRCUM-
STANCES be carried out between the times of 9 P .M. (21:00) and 3 A.M. (03:00).
Magnetic fields can adversely affect the accuracy of your watch.
Magnetic fields.
Also, we would recommend that you avoid placing your watch near electronic
devices that may generate large magnetic fields (radio, smartphone, television,
computer, tablet, loudspeakers etc.).
Water resistance. Once the watch is set, to ensure perfect water resistance,
push the crown back to position 0. Never operate the crown underwater.
The 4 slotted screws (D) mount the bezel to the case and ensure the water
Note:
resistance of the watch. To benefit from the Bell & Ross warranty, these screws
must never be unscrewed.
hours, minutes and seconds. Date
Case: 41 mm in diameter.
0 2
G
F
Setting the time. Pull the crown out to position 2. The seconds hand will stop,
enabling you to set the time to the nearest second. Set the time by rotating the
crown in the required direction.
Setting the date. Quickset* (crown in position 1): pull the crown out to position
1 and set the date by rotating the crown anticlockwise. Slow setting (crown in
position 2): to ensure the date changes at midnight rather than noon, it is recom-
mended you set the date by adjusting the hands of the watch. Pull the crown out
to position 2 and turn the hands until the date changes. Then set the precise time.
A.
Minute hand
B.
Hour hand
C.
Second hand
D.
Case attachment screws
(NEVER UNSCREW)
E.
Strap attachment
F.
Date
G.
Crown
0.
Wind the movement manually (rotate clockwise)
1.
Set the date (rotate anticlockwise)
2.
Set the time (rotate in either direction)
MAINTENANCE
After being immersed in seawater, it is recommended to carefully rinse off the
watch and strap with fresh water. It is also recommended to have the water resis-
tance of your watch checked every two years. To ensure a service that meets the
brand's exacting standards, any servicing of your watch must be carried out by
the Bell & Ross service centre or a watchmaker approved by Bell & Ross.
INTERNATIONAL WARRANTY
To benefit from your 2-year international warranty, your card must be acti-
vated at the time of purchase by your approved Bell & Ross point of sale, and
presented every time an operation is performed. You can now access the digital
version of this card and all the information relating to your watch by scanning the
QR code or visiting: www.bellross.com/warranty.
To ensure a service that meets the brand's exacting standards, any servicing of
your watch must be carried out by the Bell & Ross service centre or a watchmaker
approved by Bell & Ross. The warranty does not, however, include:
. Any damage caused by accidents or by inappropriate or improper use of the
watch (e.g. violent impacts, crushing, rough handling of the clasp).
. Any damage caused by repair or disassembly operations carried out by a retailer
or after-sales service centre not approved by Bell & Ross.
. The consequences of the watch and bracelet/strap ageing and normal wear and tear.
3