Therabody THERAGUN PRO Plus Manual Del Usuario página 8

EN 10. Connecting the Attachments
1. Ensure that the device is powered off before connecting or removing any attachments.
2. Line up the white dot on the device with the white dot on the attachment. Insert the attachment into the device arm, twist and lock into place.
3. To unlock and remove the attachment, twist in the reverse direction and pull it off.
*Only connect attachments that are included with the Theragun PRO Plus device or the cold attachment that is sold separately. Attachments from other Theragun
devices are not compatible with your Theragun PRO Plus device.
Warning: Do not place your finger between the attachment and the end of the arm, as this may cause pinching or injury.
ON OFF
11. Using the Attachments
The Theragun PRO Plus device has eight high-quality attachments designed for a more
personalized treatment. The five percussive attachments, the Dampener, Standard Ball,
Thumb, Micro-point, and Wedge, and the Vibration, Heat, and *Cold attachments are
comfortable and hygienic without absorbing sweat, lotion, or oils.
*Cold attachment sold separately
8