WIRING
Note: This range
hood must be properly
grounded.
The unit should be installed by a
qualified
electrician
in accordance
with all
applicable
national
and local electrical
33=7/16"
codes.
(85cm) max
GROUNDING
INSTRUCTIONS
This appliance must be grounded. In the event
of an electrical
short
circuit,
grounding
reduces the risk of electric shock by providing
an escape wire for the electric current. This
appliance
is equipped with a cord having a
grounding
wire with a grounding
plug. The
plug must be plugged into an outlet that is
properly installed and grounded.
WARNING - Improper grounding can result in a risk of electric shock.
Consult a qualified electrician
if the grounding
instructions
are not completely
understood, or if doubt exists as to whether the appliance is properly grounded.
Do not use an extension cord. If the power supply cord is too short, have a qualified
electrician install an outlet near the appliance.
Set the electrical power supply within the space covered by the decorative flues.
Position the power socket at a maximum distance of 33-7/16" (85 cm) from where
the lead exits from the hood (see illustration alongside).
Make sure this does not
interfere with the decorative flues (where the flue touches the wall).
Fit the plug into the power socket.
-7-