Publicidad
Idiomas disponibles
Idiomas disponibles
7
Control Lock
Press and hold the Soil Level and Water Level buttons at the same time
for 3 seconds to turn on the child lock function. Press and hold these
lock function is turned on, the only button that works is the POWER
button and the Soil Level and Water Level
Water Level
8
Press to select the water level. washing times and wash cycle setting.
For more information, see Program function on Page 34.
9
Fabric Softener
Add liquid fabric softener to the fabric softener compartment, and
then press this button. The fabric softener will be added to the cycle
at the correct time.
Spin Only/Signal
10
Press to select the Spin Only. This function will drain water and spin.
Press again to cancel.
Hold button for 3 seconds to turn on end of cycle signal. Press again
for 3 seconds to cancel.
Extra Rinse
11
Press to add an extra rinse to the wash cycle. Press again to cancel.
Smart Control
12
Smart
Press[
] 3 seconds to connect your washer to the SmartHome
Control
APP on your phone.
See Page 35 for instructions on downloading the SmartHome APP.
This is the wireless network switch, if you want to make your appliance
connect to the internet, you need turn on this button.
After connecting your device to wireless network, press [
indicating that it has entered the remote control state.
Smart phone smart control should meet the following conditions:
1. The appliance should connect to the internet;
2. The door of drum should be closed.
Remark:
- If the door is open in anytime, the smart control function will be
failure.
-
automatically, if you want to use smart control function again, you
need turn on it again.
Smart
] once ,
Control
27
Publicidad
