Publicidad
Idiomas disponibles
Idiomas disponibles
WASHER CARE
Caution
to your washer and prevents the possibility of damage from escaping
water. Leave the lid open to let the inside of your washer dry out.
WARNING
Certain internal parts are intentionally not grounded and may present a
risk of electric shock only during servicing. Service Personnel – Do not
contact the following parts while the appliance is energized: Electrical
Valve, Drain Pump and Main Motor and Retractor.
CLEANING AND MAINTENANCE
Cleaning the exterior
Use a soft cloth to wipe up all detergent, bleach, or other spills as they
occur.
Cleaning the interior
•
Clean the interior of your washer periodically to remove any dirt,
soil, odor, mold, mildew, or bacterial residue that may remain in your
washer as a result of washing clothes.
•
Failure to follow these instructions may result in unpleasant
conditions, including odors or permanent stains in your washer or
on your laundry.
•
To remove hard water deposits, use a cleaner labeled "Washer safe".
Cleaning the control panel
•
Clean with a soft, damp cloth. Do not use abrasive powders or
cleaning pads.
•
Do not spray cleaners directly on the panel. The control panel finish
may be damaged by some laundry pre-treatment soil and stain
remover products. Apply such products away from your washer and
wipe up any spills or over-spray immediately.
Cleaning the detergent, bleach, or softener compartment
•
Clean with a soft, damp cloth. Do not use abrasive powders or
cleaning pads.
•
Do not spray cleaners directly on the panel. The control panel finish
may be damaged by some laundry pre-treatment soil and stain
remover products. Apply such products away from your washer and
wipe up any spills or over-spray immediately.
Cleaning the tub
The Tub Clean cycle is a self-cleaning cycle that removes the causes
of odors that may occur inside your washer without using a cleaning
agent. We suggest cleaning the tub about once a month.
38
Publicidad
